This
University-developed lead-free solder not only dodges the toxicity of
lead, but also demonstrates higher performance in critical solder
joints. Qualities to note are increased shear strength, resistance to
creep and thermal-mechanical fatigue over current leaded solders.
Contains 4.7% silver (highest available). Use
“high” setting on soldering iron.
Homegrown Audio Brand Lead-Free Silver Solder -
1 oz.
$9.95 / oz
This
University-developed lead-free solder not only steers clear of the
toxicity of lead, but also demonstrates significantly increased
performance in critical solder joints. Qualities to note are improved
shear strength, and resistance to creep and thermal-mechanical fatigue
over current leaded solders. Contains 4.7% silver (highest available).
Use “high” setting on soldering iron.
Audio Grade Silver Solder
$7.95 / oz
4%
silver content, low melting temperature.
Polyolefin
Heat-shrinkable tubes, 3/8” x 2”
$0.25 / each
Application of heat above 121C ( a hairdryer will work) will shrink
these tubes by up to 50% in diameter, but less than 5% in length.
Provides strength to the cable/connector interface, as well as
resisting sunlight and moisture. Stock colors are listed, others
available on request.
Polyolefin
Heat-shrinkable tubes, 3/8” x 4”
$0.35 / each
Application of heat above 121C ( a hairdryer will work) will shrink
these tubes by up to 50% in diameter, but less than 5% in length.
Provides strength to the cable/connector interface, as well as
resisting sunlight and moisture. Stock colors are listed, others
available on request.
Polyolefin
Heat-shrinkable tubes, 1 1/4” x 2”
$0.50 / each
Application of heat above
121C ( a hairdryer will work) will shrink these tubes by up to 50% in
diameter, but less than 5% in length. Provides strength to the
cable/connector interface, as well as resisting sunlight and moisture.
Stock colors are listed, others available on request.
Nylon Mesh, 1/8" and 1/4"
$0.25 / ft.
PET (Polyethylene terephthalate) monofilament braided into a tubular sleeve used to
protect cable assemblies against abrasion and cut through,
while remaining lightweight and flexible. Expandable to
up to 3X original diameter.
